Skip to product information
1 of 7

Seaview

Seaview Retrofit Cable Seal

Seaview Retrofit Cable Seal

Regular price $28.99 USD
Regular price Sale price $28.99 USD
Sale Sold out
Shipping calculated at checkout.
Quantity
Made in the USA - Est. 2026
📦
Ships from FL

Choose your version from the menu above. Details for each version are below.

Versions

Version Part Number
Grey, up to 10mm CG20P-G2
Grey, up to 17mm CG30P-G2
Black, up to 13.5mm CG20PB2
Black, up to 27.5mm CG30PB2
Grey, up to 10mm / Grey, up to 17mm

The Seaview Retrofit Cable Seal is the only guaranteed and proven watertight installation for your currently installed cables! The Retrofit Cable Seal provides a watertight installation for your currently installed cables. No need to re-run your cables, simply install with your cable in place! These Seaview Retrofit Cable Seals provide a waterproof pass-through for the antenna, transducer, lights, power, and other cables without removal of the factory-installed cable connector. 

Many Applications

  • Marine - Radars, satellite domes, cameras, lights and more!
  • Automotive - Seal the cables from your exterior lights going into your vehicle. Satellite domes for RVs.
  • Home - Easy installation to clean up current cables entering the house. Paintable shell to match the color of your house. Small in diameter and profile to fit in most applications. Extremely durable in all weather conditions.

Easy Installation

Install with cable in place! No need to remove cable connectors or cable at all. Features captive nuts. All hardware provided for easy installation. 

Waterproof

IPX6 and IPX7 waterproof rating. Uses a tapered watertight rubber seal and base gasket. 

Note:

*All Seaview Cable Seals (including the round Cable Seals) will work with more than one cable as long as each cable has its own hole and there is at least .125" of rubber around each hole.

Black, up to 13.5mm

Seaview retrofit vertical cable seals provide a watertight pass-through for cables that are already installed. Their split design fits around existing cables, so you can seal antenna, transducer, lighting, or power cable entries without disconnecting or removing factory-fitted connectors. 

Cables up to 13.5 mm (0.53"); connectors up to 20 mm.

Custom-fit seal: Drill each cable opening to suit the cable diameter. Choose a drill bit within ±0.02" (0.508 mm) of the measured cable. For multiple cables, use separate holes and leave at least 1/8" (3.175 mm) of rubber between holes and at the plug edge.

Black, up to 27.5mm

Seaview retrofit vertical cable seals provide a watertight pass-through for cables that are already installed. Their split design fits around existing cables, so you can seal antenna, transducer, lighting, or power cable entries without disconnecting or removing factory-fitted connectors. 

 Cables up to 27.5 mm (1.08"); connectors up to 34 mm.

Custom-fit seal: Drill each cable opening to suit the cable diameter. Choose a drill bit within ±0.02" (0.508 mm) of the measured cable. For multiple cables, use separate holes and leave at least 1/8" (3.175 mm) of rubber between holes and at the plug edge.

Documentation

View full details