{"title":"Trolling Motor Remote Holders","description":"","products":[{"product_id":"garmin-force-kraken-remote-holder","title":"Garmin Force (Kraken, Pro, Etc) Remote Holder","description":"\u003cp data-start=\"541\" data-end=\"621\"\u003eYour remote shouldn’t be rolling around the console or baking in the sun.\u003c\/p\u003e\n\u003cp data-start=\"623\" data-end=\"872\"\u003eThis secure flush mount is purpose-built to hold the Garmin Force Kraken remote firmly in place while maintaining full access to every control. The design captures the remote tightly so it stays put in rough seas, hard turns, and long runs offshore.\u003c\/p\u003e\n\u003cp data-start=\"874\" data-end=\"1140\"\u003eThe low-profile form integrates cleanly into your dash, leaning post, or vertical panel. The remote slides in smoothly and locks into position without blocking side buttons or the screen. You can read the display clearly and operate all controls without removing it.\u003c\/p\u003e\n\u003cp data-start=\"1142\" data-end=\"1378\"\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your remote secure and protected when not on the water.\u003c\/p\u003e\n\u003ch3 data-start=\"1380\" data-end=\"1396\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1400\" data-end=\"1449\"\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n\u003cli data-start=\"1452\" data-end=\"1496\"\u003eSecure retention in rough water conditions\u003c\/li\u003e\n\u003cli data-start=\"1499\" data-end=\"1563\"\u003eFull access to screen and all buttons, including side controls\u003c\/li\u003e\n\u003cli data-start=\"1566\" data-end=\"1610\"\u003eSun-shielding design to reduce UV exposure\u003c\/li\u003e\n\u003cli data-start=\"1613\" data-end=\"1644\"\u003eMarine-grade ASA construction\u003c\/li\u003e\n\u003cli data-start=\"1647\" data-end=\"1689\"\u003eSuitable for boat or indoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Velcro Strap T-Top Rail Adapter for No Drill T-Top Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eVelcro Strap T-Top Rail Version:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Velcro Strap Rail Mount Adapter\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Garmin. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59238792462417,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630637056081,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Velcro Strap T-Top Rail Mount","offer_id":59580806922321,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59158849847377,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59238792429649,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630637088849,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Velcro Strap T-Top Rail Mount","offer_id":59580806955089,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59158849814609,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8281-Photoroom.jpg?v=1774095694"},{"product_id":"trolling-motor-remote-holder-for-minn-kota-trolling-motors","title":"Minn Kota Advanced GPS Wireless Remote Holder","description":"\u003cp data-end=\"621\" data-start=\"541\"\u003eYour remote shouldn’t be rolling around the console or baking in the sun.\u003c\/p\u003e\n\u003cp data-end=\"872\" data-start=\"623\"\u003eThis secure flush mount is purpose-built to hold the Minn Kota Advanced GPS Navigation Wireless remote firmly in place while maintaining full access to every control. The design captures the remote tightly so it stays put in rough seas, hard turns, and long runs offshore.\u003c\/p\u003e\n\u003cp data-end=\"1140\" data-start=\"874\"\u003eThe low-profile form integrates cleanly into your dash, leaning post, or vertical panel. The remote slides in smoothly and locks into position without blocking side buttons or the screen. You can read the display clearly and operate all controls without removing it.\u003c\/p\u003e\n\u003cp data-end=\"1378\" data-start=\"1142\"\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your remote secure and protected when not on the water.\u003c\/p\u003e\n\u003ch3 data-end=\"1396\" data-start=\"1380\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-end=\"1449\" data-start=\"1400\"\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n\u003cli data-end=\"1496\" data-start=\"1452\"\u003eSecure retention in rough water conditions\u003c\/li\u003e\n\u003cli data-end=\"1563\" data-start=\"1499\"\u003eFull access to screen and all buttons, including side controls\u003c\/li\u003e\n\u003cli data-end=\"1610\" data-start=\"1566\"\u003eSun-shielding design to reduce UV exposure\u003c\/li\u003e\n\u003cli data-end=\"1644\" data-start=\"1613\"\u003eMarine-grade ASA construction\u003c\/li\u003e\n\u003cli data-end=\"1689\" data-start=\"1647\"\u003eSuitable for boat or indoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Velcro Strap T-Top Rail Adapter for No Drill T-Top Install\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Advanced GPS Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Advanced GPS Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eVelcro Strap T-Top Rail Version:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Advanced Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Velcro Strap Rail Mount Adapter\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Advanced Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota is a registered trademark of Johnson Outdoors Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59238790922321,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630636990545,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Velcro Strap T-Top Rail Mount","offer_id":59580810231889,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59192640634961,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59238790889553,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630637023313,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Velcro Strap T-Top Rail Mount","offer_id":59580810264657,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59192640602193,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8171.jpg?v=1774270371"},{"product_id":"minn-kota-micro-bluetooth-remote-holder","title":"Minn Kota Micro Bluetooth Remote Holder","description":"\u003ch3\u003eStop Losing Your Minn Kota Micro Remote\u003c\/h3\u003e\n\u003cp\u003eThere's a gap in the market—and your boat. Minn Kota makes exceptional Micro Bluetooth remotes for tournament bass fishing, but there's \u003cb\u003eno official holder\u003c\/b\u003e designed specifically for them. Your remote bounces loose, gets lost under tackle boxes, or falls overboard. The Micro Remote Holder by ShoreWright solves that problem.\u003c\/p\u003e\n\u003ch4\u003eBuilt For Precision. Built For Battle.\u003c\/h4\u003e\n\u003cp\u003eThis isn't a friction-fit holder. The \u003cb\u003eclick-in positive retention system\u003c\/b\u003e uses internal ribs to lock your Micro Remote in place—no wobbling, no drops in rough water. Mount it once on your console or dash and forget about it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction\u003c\/b\u003e – UV-resistant, weather-resistant. Superior to cheap PETG that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Design\u003c\/b\u003e – 2.5\"W x 2.5\"H x 1.2\"D. Matches the Micro Remote's small footprint. Won't clutter your helm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with \u003cb\u003eMinn Kota Micro Remote (Bluetooth)\u003c\/b\u003e Part #1866560 and #1866561. Compatible with Bluetooth-enabled motors with Minn Kota navigation systems (2017–2023) and all Advanced GPS trolling motors (2023+).\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Micro Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Micro Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota Micro Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota is a registered trademark of Johnson Outdoors Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59238790430801,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630637350993,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59220028653649,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59238790463569,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630637383761,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59220028686417,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/Hero.jpg?v=1774060523"},{"product_id":"motorguide-pinpoint-gps-xi-series-remote-holder","title":"MotorGuide Pinpoint GPS Xi Series Remote Holder","description":"\u003ch3\u003eStop Losing Your MotorGuide Pinpoint GPS Remote\u003c\/h3\u003e\n\u003cp\u003eMotorGuide Xi Series owners know the drill. You set your Pinpoint remote down on the console, hit a wake, and now you're digging through rod lockers trying to find it. Or worse, it's already in the lake. MotorGuide built a great remote but never made a place to put it. The \u003cb\u003ePinpoint GPS Remote Holder\u003c\/b\u003e by ShoreWright gives your remote a permanent home on the dash.\u003c\/p\u003e\n\u003ch4\u003eBuilt For Precision. Built For Battle.\u003c\/h4\u003e\n\u003cp\u003eThis is a friction-fit holder on steroids. The \u003cb\u003eclick-in positive retention system\u003c\/b\u003e uses internal ribs to lock your Pinpoint GPS Remote in place—no wobbling, no drops in rough water. Mount it once on your console or dash and forget about it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction\u003c\/b\u003e – UV-resistant, weather-resistant. Superior to other cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Design\u003c\/b\u003e – 2.5\"W x 2.25\"H x 1.2\"D. Low-profile mount that won't clutter your helm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eMotorGuide Pinpoint GPS Remote\u003c\/b\u003e (Part #8M0092071). Compatible with all MotorGuide Xi3 and Xi5 trolling motors equipped with Pinpoint GPS.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× MotorGuide Pinpoint GPS Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× MotorGuide Pinpoint GPS Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× MotorGuide Pinpoint GPS Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by MotorGuide or Mercury Marine. MotorGuide and Pinpoint are registered trademarks of Brunswick Corporation. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59270579290193,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630659829841,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59270579322961,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59270579355729,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630659862609,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59270579388497,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8628-Photoroom.jpg?v=1775364382"},{"product_id":"minn-kota-i-pilot-wireless-remote-holder","title":"Minn Kota i-Pilot Wireless Remote Holder","description":"\u003ch3\u003eStop Losing Your Minn Kota iPilot Remote\u003c\/h3\u003e\n\u003cp\u003eEvery iPilot owner has done it. You set the remote on the console, hit a wake, and its gone. Or you just set it somewhere and now its hiding. Minn Kota gave you an incredible system but no place to keep the remote. The \u003cb\u003eiPilot Wireless Remote Holder\u003c\/b\u003e by ShoreWright fixes that.\u003c\/p\u003e\n\u003cp\u003eThis is a friction-fit holder on steroids. The \u003cb\u003eclick-in positive retention system\u003c\/b\u003e uses internal ribs to lock your iPilot Remote in place—no wobbling, no drops in rough water. Mount it once on your console or dash and forget about it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction\u003c\/b\u003e – UV-resistant, weather-resistant. Superior to other cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Design\u003c\/b\u003e – 3\"W x 2.5\"H x 1.75\"D. Sized to match the iPilot remote's footprint without eating up dash space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eMinn Kota iPilot Wireless Remote (Bluetooth)\u003c\/b\u003e Part #1866550. Compatible with Bluetooth-enabled iPilot systems on Ultrex, Ulterra, Terrova, and PowerDrive V2 trolling motors (2017+). Not compatible with iPilot Link or Advanced GPS remotes.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Wireless Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Wireless Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Wireless Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota and iPilot are registered trademarks of Johnson Outdoors Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59272112472145,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630656421969,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59272112504913,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59272112537681,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630656454737,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59272112570449,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8641-Photoroom.jpg?v=1775406656"},{"product_id":"minn-kota-link-remote-holder","title":"Minn Kota i-Pilot Link Remote Holder","description":"\u003ch3\u003eStop Losing Your Minn Kota iPilot Link Remote\u003c\/h3\u003e\n\u003cp\u003eYou paid over $300 for the most advanced trolling motor remote on the market—a GPS touchscreen that fits in your hand. And Minn Kota still didn't give you a secure place to put it. The \u003cb\u003eiPilot Link Remote Holder\u003c\/b\u003e by ShoreWright fixes that.\u003c\/p\u003e\n\u003cp\u003eThis isn't a simple sleeve or clip. The holder uses the \u003cb\u003enatural geometry of the iPilot Link Remote itself\u003c\/b\u003e to lock it securely in place with a satisfying click. \u003cstrong\u003eNo moving parts\u003c\/strong\u003e, no latches, no straps. It holds firm in rough water and releases instantly when you need it. Every button stays fully accessible, and a built-in passthrough lets you run your charging cable or attach a lanyard without ever removing the remote from the mount.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention\u003c\/b\u003e – No moving parts. The holder uses the remote's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Button Access\u003c\/b\u003e – Every control on the iPilot Link Remote remains functional while mounted. No fumbling, no removing it just to make an adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCharging \u0026amp; Lanyard Passthrough\u003c\/b\u003e – Built-in passthrough accommodates your charging cable so you can top off the remote without pulling it from the mount. The same port doubles as a lanyard loop for anglers who prefer to keep it around their neck. \u003cstrong\u003e\u003cem\u003eNote: The holder utilizes the top lanyard slot to secure the remote, so it is no longer available for lanyard use—but the bottom slot works great and actually orients the remote better when worn around your neck anyway.\u003c\/em\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eASA Plastic Construction\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"1380\" data-end=\"1396\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1400\" data-end=\"1449\"\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n\u003cli data-start=\"1452\" data-end=\"1496\"\u003eSecure retention in rough water conditions\u003c\/li\u003e\n\u003cli data-start=\"1499\" data-end=\"1563\"\u003eFull access to screen and all buttons, including side controls\u003c\/li\u003e\n\u003cli data-start=\"1566\" data-end=\"1610\"\u003eSun-shielding design to reduce UV exposure\u003c\/li\u003e\n\u003cli data-start=\"1613\" data-end=\"1644\"\u003eMarine-grade ASA construction\u003c\/li\u003e\n\u003cli data-start=\"1647\" data-end=\"1689\"\u003eSuitable for boat or indoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOptional Velcro Strap T-Top Rail Adapter for No Drill T-Top Install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eMinn Kota iPilot Link Remote (Bluetooth)\u003c\/b\u003e Part #1866650. Compatible with Bluetooth-enabled i-Pilot Link systems on Ultrex, Ulterra, Terrova, and PowerDrive V2 trolling motors. Not compatible with the standard iPilot Wireless Remote or non-Bluetooth i-Pilot Link systems.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Link Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Link Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eVelcro Strap T-Top Rail Version:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn-Kota iPilot Link Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Velcro Strap Rail Mount Adapter\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× Minn Kota iPilot Link Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota and iPilot Link are registered trademarks of Johnson Outdoors Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59334716162129,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630640463953,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Velcro Strap T-Top Rail Mount","offer_id":59580822585425,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59334716194897,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59334716227665,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630640496721,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Velcro Strap T-Top Rail Mount","offer_id":59580822618193,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59334716260433,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/Photoroom_20260411_103649.jpg?v=1775922087"},{"product_id":"lowrance-simrad-recon-remote-holder","title":"Lowrance | Simrad Recon Remote Holder","description":"\u003ch3\u003eYour Recon FreeSteer Remote Deserves a Home on the Console\u003c\/h3\u003e\n\u003cp\u003eYou just spent serious money on a Lowrance Recon trolling motor, and the FreeSteer joystick is the brain of the whole system. But it's small, it's wearable, and the second you set it down it disappears. ShoreWright fixes that.\u003c\/p\u003e\n\u003cp\u003eThis holder docks the FreeSteer into a precision-molded shell that uses the remote's own contours to click it firmly into place. No clamps, no straps, no moving parts to fail. The remote drops in, locks home, and stays put through chop, wakes, and hard turns — but lifts free instantly the moment you reach for it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction\u003c\/b\u003e – UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention\u003c\/b\u003e – No moving parts. The holder uses the FreeSteer's own shape to click it firmly into place. Secure in rough water, instant to release when you need to grab it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Joystick \u0026amp; Button Access\u003c\/b\u003e – The 360° thumb joystick and every control button stay fully usable while the remote is docked. Steer, anchor, and adjust speed without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Design\u003c\/b\u003e – 2.75\"W x 3\"H x 2\"D. Sized to the FreeSteer's footprint so it doesn't crowd your console.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 304 stainless mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eLowrance \/ Simrad FreeSteer™ Joystick Remote\u003c\/b\u003e Part #000-16176-001. Compatible with the Lowrance Recon Trolling Motor in all shaft lengths — Freshwater 48\", 54\", 60\", 72\" and Saltwater 54\", 60\", 72\". Also fits the Simrad-branded Recon system. Not compatible with Lowrance Ghost, MotorGuide Xi-series, or Minn Kota remotes.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Lowrance\/Simrad Recon Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Lowrance\/Simrad Recon Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Lowrance\/Simrad Recon Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Lowrance, Simrad, or Navico Group. Lowrance, Simrad, Recon, and FreeSteer are registered trademarks of Navico Group. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59435863900241,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630640070737,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59435863867473,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59435863965777,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630640103505,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59435863933009,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8827-Photoroom.jpg?v=1777488104"},{"product_id":"minn-kota-i-pilot-legacy-remote-holder-pre-2017","title":"Minn Kota i-Pilot LEGACY Remote Holder (Pre-2017)","description":"\u003ch3\u003eDon't Lose Your Legacy Remote — They Don't Make Them Anymore\u003c\/h3\u003e\n\u003cp\u003eIf you're running a pre-2017 Minn Kota with the original i-Pilot, you already know: the Legacy remote is irreplaceable. Minn Kota moved on to Bluetooth, and a working Legacy puck on eBay now runs more than the holder, more than the batteries, sometimes more than the rest of your tackle. \u003c\/p\u003e\n\u003cp\u003eShoreWright's holder docks the Legacy remote into a precision-molded shell that uses the puck's own geometry to click it firmly into place. No clamps, no friction pads, no moving parts to fail. The remote drops in, locks home, and stays put through chop, wakes, and hard turns — and lifts free instantly the moment you reach for it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction\u003c\/b\u003e – UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention\u003c\/b\u003e – No moving parts. The holder uses the Legacy remote's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Button Access\u003c\/b\u003e – Every control on the remote remains functional while mounted. Arrows, Spot-Lock, AutoPilot, speed — no fumbling, no removing it to make an adjustment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eLanyard Passthrough\u003c\/b\u003e – Built-in passthrough doubles as a lanyard loop if you'd rather keep the remote around your neck or wrist when you take it off the dock. \u003cem\u003eNote: The holder utilizes the top lanyard slot to secure the remote, so it is no longer available for lanyard use—but the bottom slot works great and actually orients the remote better when worn around your neck anyway.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Design\u003c\/b\u003e – 2.75\"W x 2.5\"H x 1.5\"D. Sized to match the Legacy remote's footprint without eating up dash space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware\u003c\/b\u003e – Two #10 304 stainless mounting screws included. Corrosion-proof. Ready to install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made Quality\u003c\/b\u003e – Designed by anglers who understand what works on the water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eMinn Kota i-Pilot Legacy Remote\u003c\/b\u003e \u003cstrong\u003e(2007–2016 production)\u003c\/strong\u003e. Compatible with Legacy i-Pilot controllers on Terrova, PowerDrive V2, Riptide ST, and Ulterra motors built between 2007 and 2016. \u003cb\u003eNot compatible\u003c\/b\u003e with the Bluetooth i-Pilot remote (2017–current) — that remote is a different shape and uses a \u003ca href=\"https:\/\/shorewright.com\/products\/minn-kota-i-pilot-wireless-remote-holder\"\u003edifferent holder\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright i-Pilot Legacy Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright i-Pilot Legacy Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright i-Pilot Legacy Remote Holder\u003c\/li\u003e\n\u003cli\u003e1× Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota and i-Pilot are registered trademarks of Johnson Outdoors. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59513036505169,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630640005201,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59513036537937,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59513036570705,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630640037969,"sku":null,"price":27.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59513036603473,"sku":null,"price":60.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8914-Photoroom.jpg?v=1778684335"},{"product_id":"furuno-gesture-control-remote-holder","title":"Furuno Gesture Control Remote Holder","description":"\u003ch3\u003eYour Furuno Remote Deserves Better Than the Cup Holder\u003c\/h3\u003e\n\u003cp\u003eYou didn't spend serious money on a Furuno MFD so the remote that controls it could roll around the dash. That little gesture-control puck is the brain of your nav station, and a rolling deck or a rough wake is all it takes to send it under a seat, into the bilge, or over the gunwale. This holder gives it a permanent home right where your hand expects to find it.\u003c\/p\u003e\n\u003cp\u003eThe shell is shaped to the remote's footprint, so it drops in vertically and secures itself using its own geometry. No straps, no clips, no moving parts to fail. Holds dead still through chop and hard turns, lifts free instantly the moment you reach for it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction:\u003c\/b\u003e UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention:\u003c\/b\u003e No moving parts. The holder uses the remote's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Touch \u0026amp; Gesture Access:\u003c\/b\u003e The control surface and every button remain fully usable while the remote is docked. Scroll, tap, and navigate without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Color Options:\u003c\/b\u003e Black or White. Select your color at checkout. Both use the same UV-stable ASA, so color is cosmetic and not a durability difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Footprint:\u003c\/b\u003e 2.5\"H x 2.3\"W x 1.5\"D. Sized to the remote's profile so it doesn't crowd your console or block your sightlines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware:\u003c\/b\u003e Two #10 304 stainless mounting screws included. Corrosion-proof, ready to install in a salty helm or right on the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made, Pensacola Built:\u003c\/b\u003e Designed and manufactured in our Pensacola, FL shop. Not drop-shipped, not licensed out.\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eOptional Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eFuruno Gesture Control Remote\u003c\/b\u003e. Compatible with Furuno NavNet TZtouch series multifunction displays that pair with the gesture remote. If you're not sure whether your MFD setup uses this remote, message us with your unit model and we'll confirm before you buy.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e2x #10 x 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e1x Marine-Grade Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Furuno or Furuno Electric Co., Ltd. Furuno and NavNet TZtouch are registered trademarks of Furuno Electric Co., Ltd. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59625707602001,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630639808593,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 4\" Vacuum Suction Cup","offer_id":59625707634769,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59625707667537,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630639841361,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 4\" Vacuum Suction Cup","offer_id":59625707700305,"sku":null,"price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/Photoroom_20260608_085352-Photoroom.jpg?v=1780926922"},{"product_id":"power-pole-cm2-remote-holder","title":"Power-Pole CM2 Remote Holder","description":"\u003ch3\u003eA Permanent Home for the Remote That Sets Your Spot\u003c\/h3\u003e\n\u003cp\u003eIf you run Power-Pole, the CM2 is the most important little piece of plastic on your boat. Drop it overboard or lose it under the seat and you're back to walking to the console every time the wind shifts you off a school. This holder gives the remote a fixed spot right where your hand expects to find it.\u003c\/p\u003e\n\u003cp\u003eThe shell is shaped to the CM2's footprint so it drops in and clicks home using the remote's own geometry. No straps, no clips, no moving parts to fail. Holds dead still through chop and hard runs, lifts free instantly the second you reach for the deploy button.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction:\u003c\/b\u003e UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention:\u003c\/b\u003e No moving parts. The holder uses the CM2's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Button Access:\u003c\/b\u003e Both buttons on the CM2 stay fully usable while the remote is docked. Deploy and retract without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Color Options:\u003c\/b\u003e Black or White. Select your color at checkout. Both use the same UV-stable ASA, so color is cosmetic and not a durability difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Footprint:\u003c\/b\u003e 1.9\"H x 2.25\"W x under 1\"D. Sized to the remote's profile so it tucks into tight spots on bass and flats boats without eating up dash space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Mount Options:\u003c\/b\u003e Pick a stainless steel screw mount for a permanent install, or the 3M Double Sided VHB Tape version for a double-sided tape install with no drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware:\u003c\/b\u003e Screw mount version includes two #10 304 stainless mounting screws. Corrosion-proof, ready to install in a salty cockpit or right on the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made, Pensacola Built:\u003c\/b\u003e Designed and manufactured in our Pensacola, FL shop. Not drop-shipped, not licensed out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003ePower-Pole CM2 Wireless Remote\u003c\/b\u003e. Compatible with Power-Pole shallow water anchor systems that use the CM2 remote (C-Monster series). Also compatible with the older CM1 remote. If you're not sure which remote you have, message us and we'll help you confirm.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Power-Pole CM2 Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e2x #10 x 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape (No Screw Holes):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Power-Pole CM2 Remote Holder, flat-back style with no screw holes (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Screws can be driven into surface or used with a backer for a bolted install.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Power-Pole or JL Marine Systems. Power-Pole, CM2, and C-Monster are registered trademarks of JL Marine Systems, Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screw","offer_id":59628265439313,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59628265472081,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screw","offer_id":59628265504849,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59628265537617,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_9140-Photoroom.jpg?v=1780972218"}],"url":"https:\/\/shorewright.com\/collections\/trolling-motor-remote-holders.oembed","provider":"ShoreWright","version":"1.0","type":"link"}