{"title":"Remote Holders","description":null,"products":[{"product_id":"garmin-force-kraken-remote-holder","title":"Garmin Force Remote Holder | Fits Force, Force Pro, Kraken, Current \u0026 Reactor Autopilot","description":"\u003cp\u003eYour remote shouldn’t be rolling around the console or baking in the sun.\u003c\/p\u003e\n\u003cp\u003eThis secure flush mount is purpose-built to hold the Garmin Force Kraken remote firmly in place while maintaining full access to every control. The design captures the remote tightly so it stays put in rough seas, hard turns, and long runs offshore.\u003c\/p\u003e\n\u003cp\u003eThe low-profile form integrates cleanly into your dash, leaning post, or vertical panel. The remote slides in smoothly and locks into position without blocking side buttons or the screen. You can read the display clearly and operate all controls without removing it.\u003c\/p\u003e\n\u003cp\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your remote secure and protected when not on the water.\u003c\/p\u003e\n\u003ch3\u003eCompatible Motors\u003c\/h3\u003e\n\u003cp\u003eThis holder fits the \u003cstrong\u003eGarmin Force handheld remote\u003c\/strong\u003e — the same gesture-steering remote that ships across the Force lineup:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGarmin Force\u003c\/li\u003e\n\u003cli\u003eForce Pro\u003c\/li\u003e\n\u003cli\u003eForce Kraken\u003c\/li\u003e\n\u003cli\u003eForce Current\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt also fits the Garmin Reactor Autopilot remote, which shares the same body.\u003c\/p\u003e\n\u003cp\u003eNot sure if yours fits? If it's the Garmin handheld remote with the screen and point-and-go gesture steering, this is your holder. Got a fit question? Drop us a message and we'll get you sorted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n\u003cli\u003eSecure retention in rough water conditions\u003c\/li\u003e\n\u003cli\u003eFull access to screen and all buttons, including side controls\u003c\/li\u003e\n\u003cli\u003eSun-shielding design to reduce UV exposure\u003c\/li\u003e\n\u003cli\u003eMarine-grade ASA construction\u003c\/li\u003e\n\u003cli\u003eSuitable for boat or indoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Genuine 4.5\" SeaSucker Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Velcro Strap T-Top Rail Adapter for No Drill T-Top Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eVelcro Strap T-Top Rail Version:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Velcro Strap Rail Mount Adapter\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright Garmin Force Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Genuine 4.5\" SeaSucker Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Garmin. SeaSucker is a trademark of its respective owner; ShoreWright is not affiliated with or endorsed by SeaSucker. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59238792462417,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630637056081,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Velcro Strap T-Top Rail Mount","offer_id":59580806922321,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":59158849847377,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Stainless Screws","offer_id":59238792429649,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630637088849,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Velcro Strap T-Top Rail Mount","offer_id":59580806955089,"sku":null,"price":40.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":59158849814609,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_8281-Photoroom.jpg?v=1774095694"},{"product_id":"furuno-gesture-control-remote-holder","title":"Furuno Gesture Control Remote Holder | NavNet TZtouch MFD Remote Mount","description":"\u003ch3\u003eYour Furuno Remote Deserves Better Than the Cup Holder\u003c\/h3\u003e\n\u003cp\u003eYou didn't spend serious money on a Furuno MFD so the remote that controls it could roll around the dash. That little gesture-control puck is the brain of your nav station, and a rolling deck or a rough wake is all it takes to send it under a seat, into the bilge, or over the gunwale. This holder gives it a permanent home right where your hand expects to find it.\u003c\/p\u003e\n\u003cp\u003eThe shell is shaped to the remote's footprint, so it drops in vertically and secures itself using its own geometry. No straps, no clips, no moving parts to fail. Holds dead still through chop and hard turns, lifts free instantly the moment you reach for it.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction:\u003c\/b\u003e UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention:\u003c\/b\u003e No moving parts. The holder uses the remote's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Touch \u0026amp; Gesture Access:\u003c\/b\u003e The control surface and every button remain fully usable while the remote is docked. Scroll, tap, and navigate without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Color Options:\u003c\/b\u003e Black or White. Select your color at checkout. Both use the same UV-stable ASA, so color is cosmetic and not a durability difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Footprint:\u003c\/b\u003e 2.5\"H x 2.3\"W x 1.5\"D. Sized to the remote's profile so it doesn't crowd your console or block your sightlines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware:\u003c\/b\u003e Two #10 304 stainless mounting screws included. Corrosion-proof, ready to install in a salty helm or right on the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made, Pensacola Built:\u003c\/b\u003e Designed and manufactured in our Pensacola, FL shop. Not drop-shipped, not licensed out.\u003c\/li\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eOptional Genuine 4.5\" SeaSucker Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eFuruno Gesture Control Remote\u003c\/b\u003e. Compatible with Furuno NavNet TZtouch series multifunction displays that pair with the gesture remote. If you're not sure whether your MFD setup uses this remote, message us with your unit model and we'll confirm before you buy.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e2x #10 x 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Furuno Gesture Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e1x Genuine 4.5\" SeaSucker Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Furuno or Furuno Electric Co., Ltd. Furuno and NavNet TZtouch are registered trademarks of Furuno Electric Co., Ltd. SeaSucker is a trademark of its respective owner; ShoreWright is not affiliated with or endorsed by SeaSucker. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59625707602001,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59630639808593,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":59625707634769,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Stainless Screws","offer_id":59625707667537,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59630639841361,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":59625707700305,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/Photoroom_20260608_085352-Photoroom.jpg?v=1780926922"},{"product_id":"power-pole-cm2-remote-holder","title":"Power-Pole CM2 Remote Holder | Fits C-Monster Shallow Water Anchor Remote","description":"\u003ch3\u003eA Permanent Home for the Remote That Sets Your Spot\u003c\/h3\u003e\n\u003cp\u003eIf you run Power-Pole, the CM2 is the most important little piece of plastic on your boat. Drop it overboard or lose it under the seat and you're back to walking to the console every time the wind shifts you off a school. This holder gives the remote a fixed spot right where your hand expects to find it.\u003c\/p\u003e\n\u003cp\u003eThe shell is shaped to the CM2's footprint so it drops in and clicks home using the remote's own geometry. No straps, no clips, no moving parts to fail. Holds dead still through chop and hard runs, lifts free instantly the second you reach for the deploy button.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction:\u003c\/b\u003e UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention:\u003c\/b\u003e No moving parts. The holder uses the CM2's own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Button Access:\u003c\/b\u003e Both buttons on the CM2 stay fully usable while the remote is docked. Deploy and retract without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Color Options:\u003c\/b\u003e Black or White. Select your color at checkout. Both use the same UV-stable ASA, so color is cosmetic and not a durability difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Footprint:\u003c\/b\u003e 1.9\"H x 2.25\"W x under 1\"D. Sized to the remote's profile so it tucks into tight spots on bass and flats boats without eating up dash space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Mount Options:\u003c\/b\u003e Pick a stainless steel screw mount for a permanent install, or the 3M Double Sided VHB Tape version for a double-sided tape install with no drilling required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware:\u003c\/b\u003e Screw mount version includes two #10 304 stainless mounting screws. Corrosion-proof, ready to install in a salty cockpit or right on the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made, Pensacola Built:\u003c\/b\u003e Designed and manufactured in our Pensacola, FL shop. Not drop-shipped, not licensed out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003ePower-Pole CM2 Wireless Remote\u003c\/b\u003e. Compatible with Power-Pole shallow water anchor systems that use the CM2 remote (C-Monster series). Also compatible with the older CM1 remote. If you're not sure which remote you have, message us and we'll help you confirm.\u003c\/p\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Power-Pole CM2 Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e2x #10 x 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape (No Screw Holes):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Power-Pole CM2 Remote Holder, flat-back style with no screw holes (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Screws can be driven into surface or used with a backer for a bolted install.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Power-Pole or JL Marine Systems. Power-Pole, CM2, and C-Monster are registered trademarks of JL Marine Systems, Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screw","offer_id":59628265439313,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59628265472081,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screw","offer_id":59628265504849,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59628265537617,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_9140-Photoroom.jpg?v=1780972218"},{"product_id":"minn-kota-raptor-remote-holder-fits-raptor-shallow-water-anchor-wireless-transmitter","title":"Minn Kota Raptor Remote Holder | Fits Raptor - Talon Shallow Water Anchor Wireless Transmitter","description":"\u003cp\u003eThis secure flush mount is purpose-built to hold the Minn Kota Raptor \u0026amp; Talon wireless remote transmitter firmly in place while maintaining full access to every button. The design captures the remote tightly, so it stays put in rough seas, hard turns, and long runs, and lifts free the instant you reach to drop or raise your anchors.\u003c\/p\u003e\n\u003cp\u003eThe low-profile form integrates cleanly into your dash, leaning post, or vertical panel. The remote drops in smoothly and clicks home using its own geometry — no straps, no clips, no moving parts to fail. Deploy and stow your Raptor without ever hunting for the remote under a seat or in a cup holder.\u003c\/p\u003e\n\u003cp\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your remote secure and protected when not on the water.\u003c\/p\u003e\n\u003ch3\u003eMarine Engineering You Can Feel\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eASA Plastic Construction:\u003c\/b\u003e UV-resistant, weather-resistant. Superior to cheap plastic that warps in the sun. Tested for saltwater and freshwater environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eGeometry-Locking Retention:\u003c\/b\u003e No moving parts. The holder uses the remote’s own shape to click it firmly into place. Secure in rough water, instant to release.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eFull Button Access:\u003c\/b\u003e Every button on the Raptor transmitter stays fully usable while the remote is docked. Deploy, stow, and adjust without unmounting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Color Options:\u003c\/b\u003e Black or White. Select your color at checkout. Both use the same UV-stable ASA, so color is cosmetic and not a durability difference.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eCompact Footprint:\u003c\/b\u003e Sized to the remote’s profile so it tucks into tight spots on bass and flats boats without eating up dash space.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eTwo Mount Options:\u003c\/b\u003e Pick a stainless steel screw mount for a permanent install, or the 3M Double Sided VHB Tape version for a no-drill install.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eStainless Steel Hardware:\u003c\/b\u003e Screw mount version includes two #10 316 stainless mounting screws. Corrosion-proof, ready to install in a salty cockpit or right on the dash.\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eAmerican-Made, Pensacola Built:\u003c\/b\u003e Designed and manufactured in our Pensacola, FL shop. Not drop-shipped, not licensed out.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatibility\u003c\/h4\u003e\n\u003cp\u003eWorks with the \u003cb\u003eMinn Kota Raptor Wireless Remote Transmitter\u003c\/b\u003e (part \u003cb\u003e2994138\u003c\/b\u003e, formerly \u003cb\u003e2994156\u003c\/b\u003e) — the handheld remote used to control the Raptor shallow water anchor system. Fits all Raptor anchor sizes (8', 10') that use this transmitter. If you’re not sure which remote you have, message us and we’ll help you confirm.\u003c\/p\u003e\n\u003ch4\u003eWhat’s in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Minn Kota Raptor Remote Holder (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003e2x #10 x 3\/4\" Stainless Steel 316 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape (No Screw Holes):\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x ShoreWright Minn Kota Raptor Remote Holder, flat-back style with no screw holes (Black or White, your choice at checkout)\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Screws can be driven into surface or used with a backer for a bolted install.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe’re a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you’ve got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Minn Kota or Johnson Outdoors. Minn Kota and Raptor are registered trademarks of Johnson Outdoors Inc. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":59872160546897,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":59872160579665,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":59872160612433,"sku":null,"price":23.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":59872160645201,"sku":null,"price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_9585-Photoroom.jpg?v=1785113841"},{"product_id":"trollmaster-pro-angler-remote-holder-fits-pro-angler-wireless-trolling-speed-remote","title":"TrollMaster Pro Angler Remote Holder | Fits Pro Angler Wireless Trolling Speed Remote","description":"\u003cp\u003eThis secure flush mount is purpose-built to hold the TrollMaster Pro Angler wireless remote firmly in place while maintaining full access to every control. The design captures the remote tightly so it stays put in rough seas, hard turns, and long trolling runs.\u003c\/p\u003e\n\u003cp\u003eThe low-profile form integrates cleanly into your dash, leaning post, or vertical panel. The remote slides in smoothly and locks into position without blocking the buttons or the backlit LCD screen. You can read the display clearly and operate all controls - including Manual Mode and Strike Mode - without removing it.\u003c\/p\u003e\n\u003cp\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your remote secure and protected when not on the water.\u003c\/p\u003e\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis holder fits the \u003cstrong\u003eTrollMaster Pro Angler Wireless remote\u003c\/strong\u003e - the handheld wireless throttle\/trolling-speed controller with the backlit LCD screen:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncluded in the Pro Angler kit (TMPROANGLER)\u003c\/li\u003e\n\u003cli\u003eSold on its own as the remote-only unit (TMPROANGLERREM)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe Pro Angler remote works with all Panther brand Electro Steer models. Not sure if yours fits? If it's the wireless Pro Angler handheld with the LCD screen, this is your holder. Got a fit question? Drop us a message and we'll get you sorted.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n\u003cli\u003eSecure retention in rough water conditions\u003c\/li\u003e\n\u003cli\u003eFull access to screen and all buttons, including side controls\u003c\/li\u003e\n\u003cli\u003eSun-shielding design to reduce UV exposure\u003c\/li\u003e\n\u003cli\u003eMarine-grade ASA construction\u003c\/li\u003e\n\u003cli\u003eSuitable for boat or indoor installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional Genuine 4.5\" SeaSucker Suction Cup or double-sided tape for a No Drill Install\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eScrew Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright TrollMaster Pro Angler Remote Holder\u003c\/li\u003e\n\u003cli\u003e2× #10 × 3\/4\" Stainless Steel 304 Pan Head Screws*\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright TrollMaster Pro Angler Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eSuction Cup Mount Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1× ShoreWright TrollMaster Pro Angler Remote Holder\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1× Genuine 4.5\" SeaSucker Suction Cup Mount\u003c\/li\u003e\n\u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*Can be screwed to surface or bolted.\u003c\/p\u003e\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by TrollMaster or CMP Group. TrollMaster and Pro Angler are trademarks of CMP Group Ltd. SeaSucker is a trademark of its respective owner; ShoreWright is not affiliated with or endorsed by SeaSucker. Remote not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ Stainless Screws","offer_id":60011292033105,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":60011292065873,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"White \/ Stainless Screws","offer_id":60011292098641,"sku":null,"price":28.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":60011292131409,"sku":null,"price":30.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":60011318411345,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false},{"title":"White \/ Genuine 4.5\" SeaSucker Suction Cup","offer_id":60011318444113,"sku":null,"price":77.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_9670-Photoroom.jpg?v=1786208356"},{"product_id":"yamaha-eks-key-fob-holder-fits-yamaha-outboards-with-y-cop-anti-theft-system","title":"Yamaha EKS Key Fob Holder | Fits Yamaha Outboards with Y-COP Anti-Theft System","description":"\u003cp\u003eYour Yamaha EKS fob shouldn't be rolling around a cup holder or hiding under a stack of dock gear.\u003c\/p\u003e\n\u003cp\u003eThis secure flush mount is purpose-built to hold the Yamaha EKS (Electronic Key Switch) fob firmly in place while maintaining full access to the On and Off buttons. The design captures the fob tightly so it stays put in rough seas, hard turns, and long runs offshore.\u003c\/p\u003e\n\u003cp\u003eThe low-profile form integrates cleanly into your helm compartment, under the console lip, or on a vertical panel. The fob slides in smoothly and clicks into position without blocking the buttons. You can arm and disarm the outboard without removing it.\u003c\/p\u003e\n\u003cp\u003eConstructed from marine-grade ASA, this mount is built for UV exposure and harsh saltwater environments. It is equally at home on a center console or mounted in your garage to keep your fob secure and protected when not on the water.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eModel:\u003c\/strong\u003e SW-YEKS-WHT (White) \/ SW-YEKS-BLK (Black)\u003cbr\u003e\u003cstrong\u003eManufacturer:\u003c\/strong\u003e ShoreWright LLC, Pensacola, FL\u003cbr\u003e\u003cstrong\u003eMaterial:\u003c\/strong\u003e Marine-grade ASA\u003cbr\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e 1.7\"W x 1.6\"H x 0.9\"D\u003cbr\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e Yamaha EKS Key Fob, Part #6X9-86261-10-00\u003c\/p\u003e\n\n\u003ch3\u003eCompatibility\u003c\/h3\u003e\n\u003cp\u003eThis holder fits one device: the Yamaha EKS (Electronic Key Switch) Key Fob, Yamaha part 6X9-86261-10-00.\u003c\/p\u003e\n\u003cp\u003eHow to check your fob: look at the sticker on the back of your fob. If it starts with \"6X9\", this is your holder. Compatible with Yamaha outboards equipped with the Y-COP (Yamaha Customer Outboard Protection) anti-theft system.\u003c\/p\u003e\n\u003cp\u003eRemote Holder will not fit these fobs:\u003c\/p\u003e\n\u003cp\u003eYamaha Helm Master EX Joystick fobs\u003cbr\u003eOlder Yamaha remote controls (non-EKS)\u003cbr\u003eAny non-Yamaha marine key fob\u003c\/p\u003e\n\u003cp\u003eNot sure which fob you've got? Shoot us a message with your outboard model and we'll get you sorted.\u003c\/p\u003e\n\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSurface mount design for a clean, integrated look\u003c\/li\u003e\n  \u003cli\u003eSecure retention in rough water conditions\u003c\/li\u003e\n  \u003cli\u003eFull access to On and Off buttons while docked\u003c\/li\u003e\n  \u003cli\u003eUV-stable, saltwater-safe marine-grade ASA construction\u003c\/li\u003e\n  \u003cli\u003eSuitable for helm compartment, console, or indoor installation\u003c\/li\u003e\n  \u003cli\u003ePre-applied 3M VHB double-sided tape for a no-drill install\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhat's in the Box\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003e3M Double Sided VHB Tape Version:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e1x Yamaha EKS Fob Holder\u003c\/li\u003e\n  \u003cli\u003ePre-Installed 3M Double Sided VHB Tape\u003c\/li\u003e\n  \u003cli\u003eInstallation Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eAbout ShoreWright\u003c\/h4\u003e\n\u003cp\u003eWe're a small husband-and-wife operation in Pensacola, FL designing and building marine and fishing accessories. Everything we sell is made by us, in our own shop. No contractors, no overseas manufacturing. If you've got feedback, a fit question, or you want a custom variant, drop us a message. We read every one.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eShoreWright is not affiliated with or endorsed by Yamaha Motor Co. Yamaha, Y-COP, and EKS are registered trademarks of Yamaha Motor Co., Ltd. Key fob not included.\u003c\/em\u003e\u003c\/p\u003e","brand":"ShoreWright","offers":[{"title":"Black \/ 3M Double Sided VHB Tape","offer_id":60308036190289,"sku":"SW-YEKS-BLK-VHB","price":20.0,"currency_code":"USD","in_stock":true},{"title":"White \/ 3M Double Sided VHB Tape","offer_id":60308036223057,"sku":"SW-YEKS-WHT-VHB","price":20.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1017\/8913\/9025\/files\/IMG_9886-Photoroom.jpg?v=1788444701"}],"url":"https:\/\/shorewright.com\/collections\/remote-holders.oembed","provider":"ShoreWright","version":"1.0","type":"link"}